Funded research initiatives and collaborations
0
₹268.85
| S.No. | Project Title | Amount | Duration |
|---|---|---|---|
| 1 |
Thermal-metallurgical-mechanical modeling of deposition welding processes
|
₹35 Lakhs
|
5 years, 2016-21
|
| 2 |
Experimental and numerical investigations on the tandem wire arc additive manufacturing process
|
₹50 Lakhs
|
3 years, 2018-21
|
| 3 |
Narrow gap welding of 12 mm thick naval steel using tandem gas metal arc welding process
|
₹27 Lakhs
|
2 years, 2018-20
|
| 4 |
Design and development of N95 equivalent mask
|
₹20 Lakhs
|
1 year, 2020-21
|
| 5 |
Development of next generation Silicon based N95 masks
|
₹20 Lakhs
|
1 year, 2020-21
|
| 6 |
Smart manufacturing platform for hybrid tandem wire arc additive manufacturing process
|
₹43 Lakhs
|
3 years, 2021-24
|
| 7 |
Mechanical and microstructural behavior of laser-based direct energy deposited and wire arc additive manufactured Ti-6Al-4V
|
₹50 Lakhs
|
3 years, 2021-24
|
| 8 |
Development of numerical model for estimating weld residual stress and distortion pattern in thick section weld joints of SMAW, GMAW, and SAW processes
|
₹9,99,873
|
07-06-2024 to 06-06-2025
|
| 9 |
Wire arc additive manufacturing of Naval impeller/propeller of 500 mm diameter
|
₹73,58,000
|
19-03-2024 to 18-03-2026
|
| 10 |
CSRC Promotional Activity at IIT Tirupati and the Al infused weld/AM defect detection research
|
₹24,00,000
|
25-11-2022 to 24-11-2025
|
| 11 |
Welding distortion control in shipbuilding
|
₹13,38,600
|
01-03-2023 to 01-04-2024
|
| 12 |
Developing technology for AI enables weld defect analyser
|
₹47,66,400
|
01-05-2023 to 01-05-2026
|
| 13 |
Structural integrity assessment for the WAAM printed tube components
|
₹37,90,021
|
01-03-2023 to 01-03-2026
|
| 14 |
SAW and Tandem SAW Welding of PEB Grades
|
₹1,41,600
|
13-04-2022 to 01-11-2022
|
1. Indian Patent Application No. 202011037154 dated 28/08/2020 for "An energy efficient variant of hot wire tungsten inert gas welding process" has been "Published" at the IPO website on 05/11/2021
1. T. Kumar, D.V. Kiran, N. Arora, and P. Sudheer Kumar, "Study of Steel-Aluminium joining under the influence of current waveforms using advanced CMT process variants", Materials and Manufacturing Processes (accepted for publication: https://doi.org/10.1080/10426914.2022.2030879) [IF: 4.616].
2. A. S. Madhvacharyula, A. V. S. Pavan, S. Gorthi, N. Venkaiah, and D.V. Kiran, "In-Situ Detection of Welding Defects - A Review", Welding in the World (accepted for publication) [IF: 2.103].
3. T. Kumar, D.V. Kiran, N. Arora, and C. Srihari, "Manipulating heat density to enhance the performance of Aluminium Alloy-Steel joints using arc oscillations in the GTAW process", Materials Letters 306 (2022) [IF: 3.423].
4. P. Gayathri, K. Uthradevi, S. Gayathri, D.V.Kiran, and S.M Maliyekkal, "A comprehensive review on antimicrobial face masks: an emerging weapon in fighting pandemics", RSC Advances 11 (2021): 6544-6576 [IF: 3.361].
5. T. Kumar, D.V. Kiran, and N. Arora, "Sheet metal joining and distortion measurement of aluminium alloy and steel in cold wire GTAW process", Materials Today: Proceedings 44 (2021): 1865-1869 [IF: 3.458].
6.T. Kumar, D.V. Kiran, J. Cheon, and N. Arora, “Probing the influence of cold wire gas tungsten arc welding current waveforms on the aluminium-steel joining”, Journal of Manufacturing Processes 59 (2020): 378-388 [IF: 5.01].
7.P. Shukla, B. Dash, D.V. Kiran, and S. Bukkapatnam, "Arc Behavior in Wire Arc Additive Manufacturing Process." Procedia Manufacturing 48 (2020): 725-729 [IF: 1.794].
8.D. W. Cho, D.V. Kiran and S.J. Na, “Analysis of molten pool behavior by flux-wall guided metal transfer in low current submerged arc welding”, International Journal of Heat and Mass, 110, 2017, pp. 104-112 [IF: 5.584].
9.W. Ligang, J. Cheon, D. V. Kiran and S. J. Na, “CFD simulations of GMA welding of horizontal fillet joint based on coordinate rotation of arc models”, Journal of Materials Processing Technology, 231, 2016, pp. 221-238 [IF: 5.551].
10.J. Cheon, D. V. Kiran and S. J. Na, “CFD based visualization of finger shaped evolution in gas metal arc welding process”, International Journal of Heat and Mass Transfer, 97, 2016, pp. 1-14 [IF: 5.584].
11.D. V. Kiran, J. Cheon, N. Arif, H. Chung and S. J. Na, “Three dimensional finite element modeling of pulsed AC gas metal arc welding processes”, International Journal of Advanced Manufacturing Technology, 86, 2016, pp. 1453-1474 [IF: 3.226].
12.J. Cheon, D. V. Kiran and S. J. Na, “Thermal metallurgical analysis of GMA welded AH36 steel using CFD-FEM framework”, Materials and Design, 91, 2016, pp. 230-241 [IF: 7.991].
13. D. W. Cho, D. V. Kiran and S. J. Na, “Analysis of the flux consumption and metal transfer for tandem submerged arc welding process under Iso-heat input conditions”, Welding Journal, 94, 2015, pp. 396s-401s [IF: 1.219].
14. D. V. Kiran, D. W. Cho, W. H. Song and S. J. Na, “Arc interaction and molten pool behaviour in the three wire submerged arc welding process”, International Journal of Heat and Mass Transfer, 87, 2015, pp. 327-340 [IF: 5.584].
15. D. V. Kiran, D. W. Cho, H. K. Lee, C. Y. Kang and S. J. Na, “A study on the quality of two-wire tandem submerged arc welds under iso-heat input conditions”, International Journal of Advanced Manufacturing Technology, 78 (1-4), 2015, pp. 53-62 [IF: 3.226].
16. D. V. Kiran and S. J. Na, "Numerical studies on submerged arc welding process", Journal of Welding and Joining, 32 (4), 2014, pp. 1-9.
17. D. V. Kiran and S. J. Na, "Experimental studies on submerged arc welding process", Journal of Welding and Joining, 32 (3), 2014, pp. 1-10.
18. D. W. Cho, D. V. Kiran, W. H. Song and S. J. Na, “Molten pool behaviour in the tandem submerged arc welding process”, Journal of Materials Processing Technology, 214 (11), 2014, pp. 2233-2247 [IF: 5.551].
19. D. V. Kiran, D W. Cho, W. H. Song and S. J. Na, “Arc behaviour in two wire tandem submerged arc welding”, Journal of Materials Processing Technology, 214 (8), 2014, pp. 1546-1556 [IF: 5.551].
20. D. V. Kiran, S. A. Alam and A. De, “Development of process maps in two wire tandem submerged arc welding process of HSLA steel”, Journal of Materials Engineering and Performance, 22 (4), 2013, pp. 988-994 [IF: 1.819].
21. D. V. Kiran, B. Basu and A. De, “Influence of process variables on weld bead quality in two wire tandem submerged arc welding of HSLA steel”, Journal of Materials Processing Technology, 212 (10), 2012, pp. 2041-2050 [IF: 5.551].
22. S. Bag, D. V. Kiran, A. A. Syed and A. De, “Efficient estimation of volumetric heat source in fusion welding process simulation”, Welding in the World, 56 (11/12), 2012, pp. 88-97 [IF: 2.103].
23. D. V. Kiran, B. Basu, A. K. Shah, S. Mishra and A. De, “Three-dimensional heat transfer analysis of two wire tandem submerged arc welding”, ISIJ International, 51 (5), 2011, pp. 793-798 [IF: 1.739].
24. D. V. Kiran, B. Basu, A. K. Shah, S. Mishra and A. De, “Probing influence of welding current on weld quality in two wire tandem submerged arc welding of HSLA steel”, Science and Technology of Welding and Joining, 15 (2), 2010, pp. 111-116 [IF: 4.564].
1. D. V. Kiran and A. De, "Reliable estimation of volumetric heat source in numerical simulation of fusion arc welding process", Indian Welding Journal, 45 (4), 2012, pp. 1-11.
1. S. J. Na, D. V. Kiran, D. W. Cho, J. H. Cheon, “Visualization of multi-wire SAW process by CFD simulations”, Visual-JW 2014, 2014, Osaka, Japan.
2. D. W. Cho, D. V. Kiran and S. J. Na, "Molten pool behaviour in the tandem submerged arc welding process", 67th Annual Assembly of the International Institute of Welding, 2014, Seoul, South Korea.
3. J. Cheon, D. V. Kiran, S. W. Han, L. Wu and S. J. Na, "Estimation of welding distortion based on CFD process simulation", 67th Annual Assembly of the International Institute of Welding, 2014, Seoul, South Korea.
4. D. V. Kiran, D. W. Cho, W. H. Song and S. J. Na, "Molten pool behavior in three wire tandem submerged arc welding of X-groove joint", 67th Annual Assembly of the International Institute of Welding, 2014, Seoul, South Korea.
5. D. V. Kiran, D. W. Cho, W. H. Song and S. J. Na, "Three-dimensional heat transfer and fluid flow modeling of two wire tandem submerged arc welding processes”, Autumn Annual Conference of KWJS, 2013, South Korea.
6. D. W. Cho, D. V. Kiran, W. H. Song and S. J. Na, “CFD simulation of submerged tandem arc welding process”, 66th Annual Assembly of the International Institute of Welding, 2013, Essen, Germany.
7. S. Bag, D. V. Kiran and A. De, “Efficient estimation of volumetric heat source in fusion welding process simulation”, 64th Annual Assembly of the International Institute of Welding, 2011, Chennai, India.
8. D. V. Kiran, V. D. Manvatkar and A. De, “Development of process maps for two tandem submerged arc welding process of HSLA steel using numerical process model and artificial neural network based prediction model”, 1st Interquadrennial ICF Conference in Middle East and Africa, 2011, Luxor, Egypt.
9. D. V. Kiran, B. Basu, A. K. Shah, S. Mishra and A. De, “Numerical modeling of two wire tandem submerged arc welding process and its experimental validation”, National Welding Conference (NWS 2010), 2010, Vishakhapatnam, India.
10. D. V. Kiran, B. Basu, A. K. Shah, S. Mishra and A. De, “Three-dimensional heat transfer modeling of tandem submerged arc welding process”, National Welding Conference (NWS 2009), 2009, Mumbai, India.